Inconsistent dispense accuracy
Sealant Gasketing (CIPG / FIPG) Solution
Driven by the shift toward compact, IP-rated enclosures and safety, CIPG/FIPG sealant gasketing usage has grown rapidly across industries. As product designs become more complex and quality standards more stringent, manufacturers are increasingly seeking dispensing systems that ensure precision, cleanliness, and process stability to meet mass-production and sustainability requirements.
Key Challenges in CIPG / FIPG Dispensing
Dripping and tailing at start/stop points
Air entrapment and void formation
Off-ratio mixing for 2K types
High-Efficiency Supply System for CIPG/FIPG Application
NEXGEN’s high-efficiency dispensing system is designed to eliminate common sealing defects. The system integrates servo-controlled metering pumps and precision suck-back valves to maintain stable pressure and instant flow cut-off at every cycle. With temperature-controlled feed units, material separation and pulsation are minimized, ensuring:
- Clean bead start and stop points
- Uniform gasket profiles & leak-free sealing performance
- Reduced material waste & lower energy consumption
Related Products
CIPG Application in Typical Industries
Battery pack sealing
Forming CIPG/FIPG gaskets along battery housing flanges to ensure long-term sealing performance against moisture, dust, and electrolyte vapor.
Automotive lighting sealing
Dispensing gaskets between lens and housing to prevent water and dust ingress for headlights, taillights, and signal lamps.
Electronics housing sealing
Dispensing precision gasket beads around sensor housings, control units, or display modules using silicone or foamable polyurethane to achieve dust-tight, and moisture-resistant enclosure protection.
Solar panel edge sealing
Applying sealants along the panel edges or frame joints to prevent moisture ingress, delamination, and corrosion, thereby improving long-term reliability in outdoor conditions.
Automotive seam sealing and window bonding
Applying sealants along body seams, joints, and window edges to improve structural rigidity, vibration damping, and weatherproofing of vehicle assemblies.
Pump, enclosure, and gearbox gasketing
FIPG/CIPG using silicone or polyurethane sealants on mechanical housings, pumps, or gearboxes to ensure leak-free sealing of oil, coolant, or air under thermal and pressure cycles.
Related Information
Battery Pack Enclosure Sealing and Gasketing (CIPG/FIPG)
This process seals the joints and seams of battery housings to protect modules from moisture, dust, and corrosive contaminants. A continuous gasket…
Read more →
Gasketing Solutions for LED Light Housings
LED lighting systems are now used everywhere—from outdoor streetlights and automotive lamps to architectural fixtures and industrial luminaires. These lighting units often…
Read more →
Solar Panel Edge Sealing Solution
Just as junction boxes need protection, the edges of the solar panel laminate also require sealing against the elements. The panel’s perimeter…
Read more →
Starter Motor Assembly: Magnet Bonding, Lubrication & Sealing
Automotive starter motors may appear simple but the stresses they endure make their design and assembly surprisingly complex. They must survive hundreds…
Read more →Find the right solution faster
Our application specialists are ready to guide you with product selection and technical solutions.
Talk to an Expert