PSD06 – 2K Progressive Cavity Pump for High-Viscosity Materials Dispensing

Product Code: 204200N (Dispense), 204200C (Controller)

Compact and precise 2K progressive cavity pump engineered for accurate metering and continuous dispensing of high-viscosity materials such as thermal interface materials, greases, and resins.

High-Precision 2K Metering

Delivers ±0.01 ml accuracy per shot with synchronized A/B control, ensuring consistent mixing ratios even for high-viscosity materials.

Wide Viscosity Compatibility

Handles materials up to 1,000,000 cP, including silicones, greases, and thermal interface compounds.

Stable Flow at Variable Speeds

Achieves up to 2.4 ml/s (1.2 ml/rev @ 1:1) while maintaining smooth, pulse-free flow for continuous production.

Multiple Rotor & Stator Options

Selectable combinations for oil-resistant, wear-resistant, and chemical-resistant applications; optional ceramic rotor ensures extended lifetime.

Intelligent PLC System

Integrated PLC + HMI enables real-time monitoring, precise calibration, and customizable dispensing modes.

Compact Integration Design

Lightweight 5 kg pump, compatible with direct mounting to MX4 feed system or R5003P pressure regulator.

Ideal for dosing resin (A) and hardener (B) in two-component systems such as potting, sealing, bonding, or gasket forming.
Handles highly viscous gap fillers and thermal greases used in EV batteries, power modules, and LED lighting assemblies, preventing oil separation and ensuring thermal stability.
Accurately dispenses continuous gasket beads for sealing automotive control units, lighting housings, battery packs, and inverter covers.
Applies precise adhesive volumes for metal, plastic, and composite parts in automotive and electronics assembly lines.
Used for dispensing TIMs, sealants, and adhesives between cells and modules to improve mechanical strength and heat dissipation.
Applicable to any process requiring high-viscosity material dosing—such as lubrication, coating, or gap sealing—with consistent precision.

Model	PSD06 2K – Dispense
Code	204200N
Flow rate	1.2 ml/rev @1:1
Accuracy	±0.01 ml @1.2 ml
Max. Dispensing speed	2.4 ml/s @1:1
Recommended Dispensing speed (HV)	In 0.8 ml/s
Max. viscosity applicable	1,000,000 cps
Inlet port	PT(f) 3/8″
Outlet port	Bell mouth type
Max. Inlet pressure	1.2 MPa
Max. Electric wire length	10M (standard 3M)
Weight	5 kg

Model	PSD06 2K – Controller
Code	204200C
Power supply	AC220V 50/60Hz, 300W
Air pressure supply	0.4~0.8 MPa (6 pi)
Air outlet port	6 pi
PLC	Siemens Simatic S7-200 Smart
HMI	Siemens KTP400 Basic 4″
External signal connector	M16-2pin (contact)
Pressure sensor connection (3 wire)	DC24V, 4~20mA (analog signal)
Ext. signal out	breakdown / finish / warning / emergency
Size	320 × 310 × 165 mm (L)
Weight	8 kg